• Sort by
    • Filtration Basics
    • Filtration Basics
      $ 4.00

      Too often, engineers believe that a quoted micron rating is the absolute...

      Too often, engineers believe that a quoted micron rating is the absolute size of the filter pores and that all particles greater than this size will be stopped. This is not the case, and this paper addresses the basic concept of filter ratings and the often quoted Beta Performance values....

    • Fluid Analysis for Mobile Equipment
    • Fluid Analysis for Mobile Equipment
      $ 139.00

      If you own or manage construction equipment, Fluid Analysis for Mobile Equipment...

      If you own or manage construction equipment, Fluid Analysis for Mobile Equipment is your resource to get the most out of your machinery assets.  With nearly 100 years of combined machinery and lubrication experience, the authors show you how to interpret fluid test results.  You will be able to achieve...

    • Fluid Condition Monitoring, Care and Cleanup
    • Fluid Condition Monitoring, Care and Cleanup
      $ 4.00

      In the course of fluid monitoring, it is necessary to know when...

      In the course of fluid monitoring, it is necessary to know when fluid contamination can be repaired, or when a system needs to be flushed. Careful evaluation helps determine if the fluid is salvageable, and if not, it is important to know how much fluid will be needed to flush...

    • Food Processing Equipment Lubrication Online
    • Food Processing Equipment Lubrication Online
      $ 279.00

      When it comes to food processing, effective lubrication is fundamental to reliable...

      When it comes to food processing, effective lubrication is fundamental to reliable and efficient manufacturing. When the Food Safety Modernization Act (FSMA) was enacted in 2011, manufacturers contributing to the creation of food, pharmaceuticals and dietary supplements were mandated to implement systems and controls that specifically address the hazards which...

    • Fundamentals of Fluid Film Lubrication
    • Fundamentals of Fluid Film Lubrication
      $ 150.00

      Written by global experts in the field, this in-depth engineering resource discusses...

      Written by global experts in the field, this in-depth engineering resource discusses the theory, design, analysis, and application of fluid film lubrication, providing proven methods for reducing friction in rotating machinery components. The book thoroughly addresses all aspects of the topic, from viscosity and rotor-bearing dynamics to elastohydrodynamic lubrication and...

    • General Inspection
    • General Inspection
      $ 50.00

      TBT04 is a general once over inspection of the whole asset, component,...

      TBT04 is a general once over inspection of the whole asset, component, or machine. List of Objectives How to perform a general inspection When to perform the inspection What conditions to observe Which conditions to report Overview of why to perform a general inspection Length of Course in Hours or...

    • Grease Characterization: Are All Greases Lithium Greases?
    • Grease Characterization: Are All Greases Lithium Greases?
      $ 4.00

      Lithium soap base lubricating greases are the most commonly used grease type,...

      Lithium soap base lubricating greases are the most commonly used grease type, but they are not the only type. Greases are generally characterized and sold according to their thickener type and/or base fluid composition. While lithium complex thickened greases have historically been the choice for high performance applications, recent advances...

    • Grease Lubrication in Rolling Bearings
    • Grease Lubrication in Rolling Bearings
      $ 199.00

      The definitive book on the science of grease lubrication for roller and...

      The definitive book on the science of grease lubrication for roller and needle bearings in industrial and vehicle engineering. Grease Lubrication in Rolling Bearings provides an overview of the existing knowledge on the various aspects of grease lubrication (including lubrication systems) and the state of the art models that exist today....

    • Home Sweet Home Poster
    • Home Sweet Home Poster
      $ 19.95

      This poster shows best practice for proper reservoir management. Hang this poster...

      This poster shows best practice for proper reservoir management. Hang this poster to send a clear message that proper care for lubricants and hydraulic fluids is critical. Poster Title: Home Sweet Home Poster Subtitle: Give oil a healthy place to live. Practice good reservoir management. Pointers: Ten bulleted tips such...

    • How a Lubrication Program Saved a Refinery Millions of Dollars
    • How a Lubrication Program Saved a Refinery Millions of Dollars
      $ 4.00

      This paper explores how a basic lubrication program implemented in the year...

      This paper explores how a basic lubrication program implemented in the year 2000 progressively moved to pacesetter performance in 2006. Lubrication is the bloodline of rotating equipment. Through proper handling, contamination control, personnel education, and testing, there is great potential for increased equipment reliability along with reduced costs. The author...

    • How Strategic Plant Reliability Management Drives Your Business
    • How Strategic Plant Reliability Management Drives Your Business
      $ 4.00

      What value is your plant reliability management strategy contributing to your organization?...

      What value is your plant reliability management strategy contributing to your organization? How are you communicating that value - both internally and externally? If you're not talking about driving shareholder value and economic value added (EVA), you're missing what reliability truly means for your business and your bottom line. This...

    • How to Detect and Control Lubricant Failure Modes
    • How to Detect and Control Lubricant Failure Modes
      $ 250.00

      Instructor:  Jeremy Wright Course Length:   3 Hours License: 1 seat x 365...

      Instructor:  Jeremy Wright Course Length:   3 Hours License: 1 seat x 365 days* Targeting root causes of failure with laser-like focus is a sure-fire way to maximize the impact of a lubrication program. Successful companies are relentless in their efforts to control and eliminate lubrication failure modes. Objectives: How to...

    • How to Detect and Control Lubrication Failure Modes
    • How to Detect and Control Lubrication Failure Modes
      $ 29.99

      Instructor: Jeremy Wright Course Length: 60 mins License: 1 seat x 365...

      Instructor: Jeremy Wright Course Length: 60 mins License: 1 seat x 365 days* Targeting root causes of failure with precision is a sure-fire way to maximize the impact of a lubrication program. Successful companies are relentless in their efforts to control and eliminate lubrication failure modes. Jeremy Wright of Noria...

    • How to Improve Your Predictive Maintenance Program or Start One from Scratch
    • How to Improve Your Predictive Maintenance Program or Start One from Scratch
      $ 4.00

      Now you can avoid the costly trial-and-error approach to predictive maintenance. This...

      Now you can avoid the costly trial-and-error approach to predictive maintenance. This paper outlines a proven path to success in PdM. Whether you want to improve your PdM program or start one from scratch, you'll find the facts you can put into practice immediately, such as: Basic Concept of Predictive...

    • How to Monitor and Save Gearboxes Using Oil Analysis
    • How to Monitor and Save Gearboxes Using Oil Analysis
      $ 4.00

      Time and again, oil analysis has proved to be a useful tool...

      Time and again, oil analysis has proved to be a useful tool in preventing and identifying failures that if left, can lead to expensive replacement of parts, additional maintenance costs and loss of revenue. Current oil analysis practices at most remote wind turbine sights has proven to be useful, but...

    • How to Plan, Develop and Implement a Lubrication Program
    • How to Plan, Develop and Implement a Lubrication Program
      $ 0.00

      Instructor: Jeremy Wright License: 1 seat x 365 days* Effective lubrication programs...

      Instructor: Jeremy Wright License: 1 seat x 365 days* Effective lubrication programs can drastically reduce downtime and deliver a healthy return on investment. The best programs are well-planned and have a roadmap to achieve the desired goals. This presentation focuses on the four phases of lubrication program development: assessing the...

    • How to Select a Motor Oil and Filter for Your Car or Truck
    • How to Select a Motor Oil and Filter for Your Car or Truck
      $ 19.95

      When it comes to changing your oil - where do you get...

      When it comes to changing your oil - where do you get your advice? Friends? Salesmen? Commercials? Before spending any more money on oil changes, synthetic oils, premium filters, engine flushes or oil treatments, learn what leading lubrication expert Jim Fitch recommends.  Don't worry about getting a sales pitch in...

    • How to Select an Oil and Filter for Your Car or Truck (Digital Download)
    • How to Select an Oil and Filter for Your Car or Truck (Digital Download)
      $ 14.95

      When it comes to changing your oil - where do you get...

      When it comes to changing your oil - where do you get your advice? Friends? Salesmen? Commercials? Before spending any more money on oil changes, synthetic oils, premium filters, engine flushes or oil treatments, learn what leading lubrication expert Jim Fitch recommends.  Don't worry about getting a sales pitch in...

    • ICML 55.0
    • ICML 55.0
      $ 14.95

      ICML 55.0 StandardOptimized Lubrication of Mechanical Physical Assets Overview Establishes WHY do...

      ICML 55.0 StandardOptimized Lubrication of Mechanical Physical Assets Overview Establishes WHY do it? Provides context between asset management principles and an engineered, well-balanced lubrication management system (LMS) Applicable to effective management of all physical assets related to lubrication Companion document that works together with ICML 55.1 Requirements and ICML 55.2...

    • ICML 55.1 Lubricated Asset Management Standard
    • ICML 55.1 Lubricated Asset Management Standard
      $ 175.00

      Requirements for the Optimized Lubrication of Mechanical Physical Assets With over 40...

      Requirements for the Optimized Lubrication of Mechanical Physical Assets With over 40 subject matter experts contributing their time and energy across several years, the ICML 55.1 requirements document represents a consensus of the worldwide machine lubrication community pertaining to well-established best management practices. It identifies and defines the requirements for...

    • ICML 55.2
    • ICML 55.2
      $ 139.96

      ICML 55.2 “Guideline for the Optimized Lubrication of Mechanical Physical Assets” Explains...

      ICML 55.2 “Guideline for the Optimized Lubrication of Mechanical Physical Assets” Explains HOW to do it Goes in-depth with guidance on how to implement, maintain, and control the LMS to be audit-ready An expansive blueprint for implementing ICML 55.1 requirements in all 12 interrelated areas necessary for a best-practice LMS...

    • IDCON - Shutdown Turnaround Optimization Process
    • IDCON - Shutdown Turnaround Optimization Process
      $ 99.00

      NEW RELIABILITY AND MAINTENANCE BOOK Whether you call it a Shutdown, Outage...

      NEW RELIABILITY AND MAINTENANCE BOOK Whether you call it a Shutdown, Outage or Turnaround the fact is that these events have a serious impact on the financials of an operation. The key to a successful event is to have a well-thought out strategy and plan.  This practical guide puts you...

    • IDCON Knocking Bolts – Six Decades in the Reliability and Maintenance Management Field - Hardback
    • IDCON Knocking Bolts – Six Decades in the Reliability and Maintenance Management Field - Hardback
      $ 79.00

      Knocking Bolts is Christer Idhammar's journey through a successful career that began as...

      Knocking Bolts is Christer Idhammar's journey through a successful career that began as an 18-year-old merchant mariner in Sweden and took him around the world as a Reliability and Maintenance Management consultant. He has been instrumental in improving the reliability and maintenance field. He implemented sustainable maintenance centers in developing countries...

    • IDCON Knocking Bolts – Six Decades in the Reliability and Maintenance Management Field - Paperback
    • IDCON Knocking Bolts – Six Decades in the Reliability and Maintenance Management Field - Paperback
      $ 39.00

      Knocking Bolts is Christer Idhammar's journey through a successful career that began as...

      Knocking Bolts is Christer Idhammar's journey through a successful career that began as an 18-year-old merchant mariner in Sweden and took him around the world as a Reliability and Maintenance Management consultant. He has been instrumental in improving the reliability and maintenance field. He implemented sustainable maintenance centers in developing countries...

    • IDCON Maintenance Planning & Scheduling
    • IDCON Maintenance Planning & Scheduling
      $ 99.00

      Maintenance Planning and Scheduling is one of the most important elements in...

      Maintenance Planning and Scheduling is one of the most important elements in maintenance management. Maintenance Planning and scheduling is also synonymous with control of maintenance. This book is a definitive authority on the subject and provides practical, tested techniques and processes by which you can build, run and manage this...

    • IDCON Preventative Maintenance/Essential Care and Condition Monitoring
    • IDCON Preventative Maintenance/Essential Care and Condition Monitoring
      $ 125.00

      A “must have” for all maintenance professionals! It is a unique resource...

      A “must have” for all maintenance professionals! It is a unique resource for improving maintenance management processes and learning smart preventive maintenance (PM), condition monitoring, inspection and troubleshooting techniques on a wide variety of components including pumps, motors, gears, bearings, chain, pipes and valves, couplings, seals, fans, lubrications, lifting equipment,...

    • IDCON Reliability Based Spare Parts & Maintenance Management
    • IDCON Reliability Based Spare Parts & Maintenance Management
      $ 49.00

      When asked to describe the largest issue they face in organizing maintenance...

      When asked to describe the largest issue they face in organizing maintenance work, many planners and supervisors reply, "Finding materials and getting them to the right place at the right time". Spare Parts and materials are a large part of any plant's costs and not having the right materials in...

    • Identification of Parts Failures
    • Identification of Parts Failures
      $ 63.00

      A highly-illustrated (over 400 illustrations and photos) failure analysis guide for automotive...

      A highly-illustrated (over 400 illustrations and photos) failure analysis guide for automotive and off-road vehicle parts. Lots of pictures and descriptions of common machine parts failures. Main topics include: Pistons, Rings, Cylinder Liners, Gaskets, Journal Bearings, Valve Gear Train, Turbochargers, Gears, Shafts, Axles, Spindles, Universal Joints, Hydrostatic Transmissions, Anti-Friction Bearings,...

    • In-Line, Continuous Monitoring of Fuel Dilution in Motor Oils by FTIR
    • In-Line, Continuous Monitoring of Fuel Dilution in Motor Oils by FTIR
      $ 4.00

      The current accepted method for determining fuel dilution in motor oils is...

      The current accepted method for determining fuel dilution in motor oils is gas chromatography. Although workable, it is not practical from the standpoint of obtaining timely, real-time data. A dynamic in-line FTIR monitoring system has been designed and used to continuously monitor fuel dilution in an engine test-bed. This FTIR...

    • In-Service Lubricant and Machine Analysis, Diagnostics, and Prognostics
    • In-Service Lubricant and Machine Analysis, Diagnostics, and Prognostics
      $ 55.00

      This compilation of the journal of ASTM International, STP1536, contains the papers...

      This compilation of the journal of ASTM International, STP1536, contains the papers published in JAI that were presented at a symposium on In-Service Lubricant and Machine Analysis, Diagnostics, and Prognostics held during December 8, 2010 in Jacksonville, FL. The symposium was sponsored by ASTM Committee D02 on Petroleum Products and...

    • Inspecting a BS&W Bowl
    • Inspecting a BS&W Bowl
      $ 50.00

      TBT05 goes into how to properly perform an inspection on a Bottom...

      TBT05 goes into how to properly perform an inspection on a Bottom Sediment and Water Bowl on a machine. List of Objectives What is a BS&W Bowl? Why Inspect it? When To inspect a BS&W Bowl? Who will be performing the inspection? How to properly perform the inspection. Length of...

    • Inspecting a Bullseye Sight Glass
    • Inspecting a Bullseye Sight Glass
      $ 50.00

      Inspecting a Bullseye Sight Glass TBT02 simply an overview of how to...

      Inspecting a Bullseye Sight Glass TBT02 simply an overview of how to properly perform an inspection on a Bullseye Sight Glass List of Objectives What is a Bullseye Sight Glass? Who performs the inspection on Bullseyes? When to inspect them? How to Properly Inspect a Bullseye Sight Glass. Length of...

    • Inspecting a Columnar Level Gauge
    • Inspecting a Columnar Level Gauge
      $ 50.00

      TBT03 is going to train personnel on how to properly inspect a...

      TBT03 is going to train personnel on how to properly inspect a Columnar Level Gauge. List of Objectives What is a Columnar Level Gauge? Who performs the inspections on them? When to inspect them? How to Properly Inspect a Columnar Level Gauge? Length of Course in Hours or Minutes00:10:50

    • Inspecting a Desiccant Breather
    • Inspecting a Desiccant Breather
      $ 50.00

      TBT01 dives into the specifics of desiccant breather inspections such as; where...

      TBT01 dives into the specifics of desiccant breather inspections such as; where the breather is located, abnormal conditions to be aware of when performing these inspections and when to repair or replace the breather. List of Objectives What is a Desiccant Breather? Where is it located on the machine? What...

    • Inspecting a Single Point Lubricator
    • Inspecting a Single Point Lubricator
      $ 50.00

      TBT06 How to properly perform an inspection on a single point automatic...

      TBT06 How to properly perform an inspection on a single point automatic lubricator. List of Objectives What is a Single Point Lubricator? Why we inspect them. Who will be performing the inspections? Conditions to be aware of or report. Length of Course in Hours or Minutes00:10:17

    • Integrated Reliability: Condition Monitoring and Maintenance of Equipment
    • Integrated Reliability: Condition Monitoring and Maintenance of Equipment
      $ 147.85

      Benefit from improved safety, performance, and product deliveries to your customers. Achieve...

      Benefit from improved safety, performance, and product deliveries to your customers. Achieve a higher rate of equipment availability, performance, product quality, and reliability. Integrated Reliability: Condition Monitoring and Maintenance of Equipment incorporates reliable engineering and mathematical modeling to help you move toward sustainable development in reliability condition monitoring and maintenance....

    • Is My Machine OK? A Field Guide to Assessing Process Machinery
    • Is My Machine OK? A Field Guide to Assessing Process Machinery
      $ 26.95

      This compact and unique reference provides those who deal with industrial machines...

      This compact and unique reference provides those who deal with industrial machines a handy guide for assessing the potential risk of failure and offers a solid basis for reliable and safe machinery operation. Combining the most commonly used assessment tools into one source, it is meant to be taken into...

    • Is This the Right Oil Lab for My Business: Considerations and Steps to Make That Determination
    • Is This the Right Oil Lab for My Business: Considerations and Steps to Make That Determination
      $ 4.00

      Selecting an oil analysis laboratory can be a stressful process. It is...

      Selecting an oil analysis laboratory can be a stressful process. It is important to make sure you get the most bang for your buck, as well as ensure that your needs are met. There are several factors to consider when selecting a laboratory including economical, logistical and scientific issues. Once...

    • Keep Our Machines Clean Poster
    • Keep Our Machines Clean Poster
      $ 19.95

      This poster reminds everyone that contamination control of lubricated machinery is important....

      This poster reminds everyone that contamination control of lubricated machinery is important. When dirt is on the outside of equipment, it can easily get into the lubricant. Use this poster to send a clear message that contamination control and lubricant quality are important to your organization. Poster Title: Keep Our...

    • Knowledge Management and the Plant: The Why and the How of It.
    • Knowledge Management and the Plant: The Why and the How of It.
      $ 4.00

      Do you ever worry about Bob retiring and how the place is...

      Do you ever worry about Bob retiring and how the place is going keep running? Do you ever ask yourself, How did we do that last time? Do the decision-makers and the implementers in your organization know where to go for good reliable information and experience on all aspects of...

    • Lean Maintenance - Reduce Costs, Improve Quality and Increase Market Share
    • Lean Maintenance - Reduce Costs, Improve Quality and Increase Market Share
      $ 4.00

      To reduce costs and improve production, most large manufacturing and process companies...

      To reduce costs and improve production, most large manufacturing and process companies that have embraced the Lean Enterprise concept have taken an approach of building all of the systems and infrastructure throughout the organization. The result of this traditional approach has been erratic implementation efforts that often stall-out, or are...

    • Lean Maintenance Repair & Overhaul
    • Lean Maintenance Repair & Overhaul
      $ 52.00

      BOOST PROFITS AND REDUCE COSTS BY EFFICIENTLY DELIVERING SUPERIOR MRO SERVICES Lean...

      BOOST PROFITS AND REDUCE COSTS BY EFFICIENTLY DELIVERING SUPERIOR MRO SERVICES Lean Maintenance Repair and Overhaul describes how MRO organizations can achieve significant improvement in financial performance by applying the Theory of Constraints (TOC) to guide the implementation of Lean manufacturing tools. This Lean/TOC approach facilitates a growth strategy by providing...

    • Lean Maintenance: A Practical, Step-By-Step Guide for Increasing Efficiency
    • Lean Maintenance: A Practical, Step-By-Step Guide for Increasing Efficiency
      $ 39.95

      The book is about applying Lean manufacturing principles to industrial maintenance in...

      The book is about applying Lean manufacturing principles to industrial maintenance in order to improve the efficiency and be able to do more with the same (or less) resources. By industrial maintenance we mean the maintenance that takes place in factories and industrial facilities. The book is the result of...

    • Lean Manufacturing - Implementation Strategies That Work
    • Lean Manufacturing - Implementation Strategies That Work
      $ 34.95

      Divided into three basic sections, this unique resource provides an understandable and...

      Divided into three basic sections, this unique resource provides an understandable and implementable approach to inserting Lean in a manufacturing operation, pointing out the stumbling blocks and pitfalls to avoid. Its goal is to to help American manufacturing more effectively go about the task of making Lean a viable process....

    • Lessons Crime Scenes: Evidence Preservation during Equipment Troubleshooting
    • Lessons Crime Scenes: Evidence Preservation during Equipment Troubleshooting
      $ 4.00

      For major crime scenes, the amount of resources expended in evidence preservation...

      For major crime scenes, the amount of resources expended in evidence preservation is enormous. This is acceptable because there is really no other method available that can reliably produce the required results, and the criminals must be caught. Unfortunately, when an equipment malfunction occurs, many businesses do not conduct such...

    • Study Packet for ICML Level 1 MLT and MLA Exam Sale Off
    • Level I MLT / Level I MLA Study Packet
      $ 295.00 $ 334.95

      This Study Packet is designed to be used for both ICML Level...

      This Study Packet is designed to be used for both ICML Level I MLT and Level I MLA certification. It includes: Flash Card Pack includes more than 385 flash cards to help you prepare for both ICML Level I MLT and Level I MLA certification. 125 Question Practice Exam This...

    • Level I MLT / MLA Flash Cards
    • Level I MLT / MLA Flash Cards
      $ 89.00

      More than 385 flash cards to use as a study aid for...

      More than 385 flash cards to use as a study aid for preparing for both the ICML Level I MLT and MLA certification exams. Flash cards let you study in small, digestible bits of information and then use repetition to help remember the information. Repetition is one of the most...

    • Level I MLT / MLA Practice Exam
    • Level I MLT / MLA Practice Exam
      $ 69.00

      Included: Practice Exam This 125 question multiple-choice practice test is a great...

      Included: Practice Exam This 125 question multiple-choice practice test is a great self-assessment tool and helps you prepare for both Level I MLT and MLA ICML certification. The answer key is detached for easy grading. Comprehensive explanations teach you the reasoning behind the correct answers. Licensed for use by one...